YD-8C series smart capacitor
Product parameters

working environment

Input voltage: 380V ± 20% or 220V ± 20%

Sampling current Is: ≤ 5A
Working temperature: -10 °C ~ 55 °C
Working frequency: 50Hz±5%
Voltage distortion rate: ≤5%
Relative humidity: up to 95%
Power supply condition
Rated voltage: ~220V/380V
Voltage deviation: ±20%
Voltage waveform: sine wave, the total distortion rate is not more than 2.5%
Power frequency: 48.5~51.5Hz
Power consumption: <3W
Measurement error
Voltage: ≤0.5%
Current: ≤0.5%
Power factor: ≤ ± 1.5%
Temperature: ±1 °C
Environmental conditions
Ambient temperature: -40 ° C ~ 40 ° C
Relative humidity: 40 ° C, 20~90%
Altitude: ≤2000m
Protection error
Voltage ≤0.5%
Current: ≤1%
Temperature: ±1 °C
Reliability parameter
Control accuracy: 100%
Control allowable times: 2 million times (State Network Electric Power Research Institute test report)
Electrical Safety

Clearance and creepage distance, insulation strength, safety protection, short-circuit strength, and control and control circuit protection are in line with the People's Republic of China power industry standard DL/T842-2003 "Use conditions for low-voltage shunt capacitor devices", GB/t22582-2008 "Low voltage Corresponding clause requirements in Power Capacitor Power Factor Compensation Device.

Product number

Exploded view

Product working principle

The product consists of intelligent components, synchronous switching switch electrical components, current sampling components and low-voltage power capacitors. The following figure shows the working principle of the phase separation compensation method in the product series.

Product wiring diagram

The products are assembled in the cabinet and form a reactive automatic compensation device, which breaks the structural mode of the traditional automatic compensation device. As shown in the figure below, it has excellent functions such as zero-cutting of the capacitor and the structure is simple, and the same cabinet can hit more electricity. Capacity, easy production, good capacity adjustment, convenient operation and maintenance.

The maximum compensation capacity of 1000mm wide reactive power compensation cabinet: 800kvar; the number of installed machines: ≤20
Maximum compensation capacity of 800mm wide reactive power compensation cabinet: 600kvar; installed number: ≤16

Product Compensation Application

Hybrid compensation package

Three-phase co-filling application program